how to plug two headphones into one computer

You may resolve this by checking for updated sound card drivers from the manufacturer's website. Check the manufacturer's website to see if they have updated drivers available for download.Īnother reason for an error to occur is if the sound card in your computer is not currently compatible with the headset. However, the manufacturer may have updated driver software available on their website. Plug stereo amplified speakers into the front output socket and a pair of headphones into the rear. Some headsets do not come with software when purchased. Home FREE is limited software and only supports the following configurations for pre-listening to music using headphones: (1) If you are using a desktop computer with a 4.1, 5.1, 6.1 or 7.1 surround sound card built-in, you can use the front and rear outputs of this for master and headphones. If any drivers came with your headset, install them and then try connecting the headset to the computer again. If you get an error message when connecting a headset to your computer, this often means that additional software is needed for the headset to work properly. The microphone portion of the headset can be tested by opening any sound recorder and recording your voice. For example, you could open a YouTube video and make sure the sound in the video can be heard. The headphones can be tested by opening anything that plays sound. If you are not sure the headphones or microphone are working, you can test each part of the headset by following the steps below. Click your headset in the list of devices to begin connecting.Make sure your Bluetooth headset is powered on and in pairing mode.In the Add a device pop up window, click Bluetooth to scan for Bluetooth devices.Click the Add Bluetooth or other device button.In Devices, click the Bluetooth & other devices option in the left navigation menu.Open the Start menu by pressing the Windows key.How to install, enable, and troubleshoot Bluetooth in Windows.Make sure Bluetooth is enabled on your computer.Once connected to the line out and microphone connectors, the headset is ready to use. In this example, the headphone cable plugs into the line out (light green) connection and the microphone cable plugs into the microphone (pink) connection. The picture shows the back of a computer sound card. If you have a laptop computer, the connection is likely a brass-colored 3.5 mm jack found on the side or front. Once the cables are identified, locate the connections on the back of your computer. A green connector indicates the cable for the headset or audio (hearing) and a connector with a pink ring indicates the microphone (speaking) cable of the headset. In some cases, the mini plug connection may be color-coded.

In some situations, it may only work if connected to the back of the computer.įirst, identify each headset cable. If the USB headset is not working properly, try connecting it to a port in a different location.

How to plug two headphones into one computer